2003 f250 seats

2003 f250 seats DEFAULT

The Ford F-250 is a beast of a truck and has been for years. This super duty’s 6.2L standard V8 engine can take on just about anything you throw at it and that’s just a fraction of what the PowerStroke diesel engine can do! You need your truck to be tough. Adding custom Ford F-250 seat covers and leather seats from Katzkin makes your interior just as rugged and long-lasting as the rest of the truck. Not only is leather easier to clean and take care of but it doesn’t hold dust and dirt as easily as leather.

Katzkin’s custom-fit, premium leather seats, and interiors are created to transform your Ford F-250. Replacing your original factory-installed cloth seats with a custom-designed leather interior from Katzkin will change the look, feel, and resale value of your car.

F-250 Seat Covers

Katzkin makes premium Ford F-250 seat covers. What makes them so great? They are specifically engineered and handcrafted to completely replace your F-250’s cloth seats with professionally installed, upholstered custom Ford F-250 leather seats. If you’re in need of replacement seats for your F-250 truck, Katzkin is the way to go! And, with our Degreez package, we can also add heated and ventilated seats to your truck at the same time.

Seat Options

One reason so many people choose Katzkin instead of the manufacturer is that we have so many F-250 leather options for them to pick from. Choose from our popular Ford F-250 Katzkin Designs, a Manufacturer Inspired Interior, or Create a Design of Your Own. We offer a choice of over 120 colors and materials including black, red, white, and blue with multiple trim options. We can make your F-250 leather seats look just the want. If you want a simple, single-tone look, we can obviously do that for you and so much more. We can add custom perforation, piping, stitching including TekStitch, embroidery, embossing, and two-tone.

We also have a huge variety of F-250 seat materials to choose from. A few of our seat options include suedezkin, Tuscany leather, Katzkin XT, alligator, and a whole lot more. Not only do we have a massive selection of pre-designed F-250 seats for you to choose from but you can also create your own design and we’ll make that happen. If you need help picking designing your new F-250 interior, our installers are experts at helping you know what looks great and will give you helpful advice.

Model Trims and Years

Katzkin’s Ford F-250 custom leather seat and interior options are available for the following model years:

2004
2005
2006
2007
2008
2009
2010

2011
2012
2013
2014
2015
2016
2017

In addition to being able to add high-quality, custom leather to a whole host of model years, we can also work on virtually any F-250 model and trim. The F-250 is one of the vehicles we install leather on the most but we can also replace cloth and leather on the heavy-duty F-350 and all of the various trims including the XL, XLT, Lariat, Raptor, and more.

ARE YOU READY?

Transform your Ford F-250 interior with Katzkin. Start now and find an installer today!

Choose Your Design
Sours: https://katzkin.com/what-do-you-drive/ford-f-250-leather-seats/

1999-2007 Ford Super Duty Seat Replacement

  • Before shot of bench seat in a 2005 Ford F-350 Super Duty.  Removal of the seat requires an 18mm socket.  Preferably a deep wall socket and a T60 Torx Bit w/ratchet or impact wrench.
    • Before shot of bench seat in a 2005 Ford F-350 Super Duty. Removal of the seat requires an 18mm socket. Preferably a deep wall socket and a T60 Torx Bit w/ratchet or impact wrench.

    Edit

  • Adjust the seat as far back as you can.  Using an 18mm deep wall socket, remove the bolts on the front that attachs the seat to the floor.  On my bench seat there were only two bolts.  If you have a 60/40 seat or bucket seats there will be more.Adjust the seat as far back as you can.  Using an 18mm deep wall socket, remove the bolts on the front that attachs the seat to the floor.  On my bench seat there were only two bolts.  If you have a 60/40 seat or bucket seats there will be more.
    • Adjust the seat as far back as you can. Using an 18mm deep wall socket, remove the bolts on the front that attachs the seat to the floor. On my bench seat there were only two bolts. If you have a 60/40 seat or bucket seats there will be more.

    Edit

  • Edit

  • Edit

  • Unplug the seat belt receiver from the vehicle seat belt buzzer plug.  it will be just under the back side of the seat.
    • Unplug the seat belt receiver from the vehicle seat belt buzzer plug. it will be just under the back side of the seat.

    Edit

    • You may now remove the old seat from the truck. if you have a bench seat like in this guide, you will need someone to help.

    Edit

  • Edit

  • Next place your jump seat in the middle on top of the transmission tunnel.  The rear holes will line up with two of the existing holes where the seat belts were attached. Place two bolts in the holes but don't tighten completely.  Lift the bottom seat up exposing the two bolt holes in the bottom of the jump seat.Next place your jump seat in the middle on top of the transmission tunnel.  The rear holes will line up with two of the existing holes where the seat belts were attached. Place two bolts in the holes but don't tighten completely.  Lift the bottom seat up exposing the two bolt holes in the bottom of the jump seat.
    • Next place your jump seat in the middle on top of the transmission tunnel. The rear holes will line up with two of the existing holes where the seat belts were attached. Place two bolts in the holes but don't tighten completely. Lift the bottom seat up exposing the two bolt holes in the bottom of the jump seat.

    Edit

  • Now mark and drill two holes in the transmission tunnel.  Carefully check what is below the tunnel to make sure you don't damage wiring or other system that may be run along the path.  This is best done with one person drilling and one person watching underneath.  These are the only holes you must drill for 2011 to 2014 seats to fit.
    • Now mark and drill two holes in the transmission tunnel. Carefully check what is below the tunnel to make sure you don't damage wiring or other system that may be run along the path. This is best done with one person drilling and one person watching underneath. These are the only holes you must drill for 2011 to 2014 seats to fit.

    Edit

  • Notice the jump seat is a little lower than the buckets.  Place your buckets in temporarily and use washers or other spacers between the floor and jump seat frame to adjust the jump seat to the same level as the buckets.
    • Notice the jump seat is a little lower than the buckets. Place your buckets in temporarily and use washers or other spacers between the floor and jump seat frame to adjust the jump seat to the same level as the buckets.

    Edit

  • Edit

  • In my case the seat belt buzzer on the new seat didn't match the vehicle plug.  Simply remove the seat belt receiver from the side of the seat with a T60 Torq bit and re-attach your old seat belt receiver to the floor bolt.  Using the old seat belt receiver gives you the proper connector and allows the buzzer to work properly.In my case the seat belt buzzer on the new seat didn't match the vehicle plug.  Simply remove the seat belt receiver from the side of the seat with a T60 Torq bit and re-attach your old seat belt receiver to the floor bolt.  Using the old seat belt receiver gives you the proper connector and allows the buzzer to work properly.
    • In my case the seat belt buzzer on the new seat didn't match the vehicle plug. Simply remove the seat belt receiver from the side of the seat with a T60 Torq bit and re-attach your old seat belt receiver to the floor bolt. Using the old seat belt receiver gives you the proper connector and allows the buzzer to work properly.

    Edit

  • Edit

  • Sours: https://www.ifixit.com/Guide/1999+2000+2001+2002+2003+2004+2005+2006+2007+Ford+Super+Duty+Seat+Replacement/38901
    1. Pwc company
    2. Go kart utah
    3. Toyota camry salvage
    4. Customer support supervisor salary
    5. Brown vinyl fencing for sale

    Shop

    Description

    Brand New Driver Side Bottom Replacement Perforated Leather Seat Cover for your 2002-2003 Ford F-250 Super Duty Truck!!

    • Original Factory Color: Medium Parchment “Tan” Perforated
    • Fits: Driver Side Bottom
    • Fits: Heated Seats and Non Heated Seats
    • Proudly Made In USA (Houston, TX)
    • Free Shipping, Brand New, Never Used
    • Takes 30-40 Minutes to Install, can email Installation Videos if needed
    • OEM Quality Leather or Better, Not an Economy Aftermarket Grade
    • Actual Replacement Cover – NOT A SLIP ON or PULLOVER. You will REMOVE the OLD COVER & then install the New Leather Cover!
    • Not sure what Color or Cover your vehicle needs? Do Not Worry!! Just give us a call!!
    • We carry the matching Lean Back, Armrest/Center Console Lid & Passenger Side Replacement Leather Seat Covers!!
    • We also have this seat in the factory Gray color!!

    This Replacement Genuine Leather Seat Cover is Guaranteed to fit the following Vehicles:

    • 2002-2003 Ford F-250 Lariat, XLT with Leather, 2WD, 4X4, 5.4L 6.8L Gas, 7.3L Power Stroke Turbo Diesel
    • 2002-2003 Ford F-350 Lariat, XLT with Leather, 2WD, 4X4, 5.4L 6.8L Gas, 7.3L Power Stroke Turbo Diesel
    • 2002-2003 Ford F-450 Lariat, XLT with Leather, 2WD, 4X4, 5.4L 6.8L Gas, 7.3L Power Stroke Turbo Diesel
    • 2002-2003 Ford F-550 Lariat, XLT with Leather, 2WD, 4X4, 5.4L 6.8L Gas, 7.3L Power Stroke Turbo Diesel

     

    Cover Details: Our seat covers are manufactured with OEM quality leather & materials. These covers are designed to exceed OEM specs but with an OEM look. Our covers do not come with any pre-cut holes, we will provide you with written instructions when the cover is mailed or email you video instructions if needed.

    How to clean and maintain your new Leather Seat Cover: We recommend using Griot’s Leather Care or Lexol Leather Conditioner. Apply the leather conditioner on a applicator pad, then rub it on the leather cover. Repeat once a month for longevity. Avoid all purpose cleaners and protectants because they will stain and damage the leather.

    Returns: All of our items come with a money back guarantee! If you are not satisfied with your order, mail it back to us for a refund! No questions asked!

    Shipping: We will ship your new Replacement Leather Seat Cover with USPS FOR FREE. Please allow 2-3 business days to process, inspect, & test fit your order. Shipping will take 2-4 business days. Free Shipping is for US customers only. We also ship worldwide. Canada and Europe shipping costs is around $40. If you would like a shipping quote you can either call us at (832) 421-2176 or email us your zip code or mailing address and we will get back to you with a shipping quote.

     

    We manufacture all of our replacement covers to the OEM specs and only use genuine original factory leather and materials. We use Genuine Leather on the seating surface and use Perforated Ultra Leather for the perforated inserts so your new cover will not rip or connect the dots! Ultra Leather is a very strong and durable synthetic leather that looks and feels like leather. All of our materials come in the original factory color. There is NO Painting or Dyeing involved so your cover will never peel or fade! Quality is mandatory which is why each cover is individually hand made and tested for fitment before it is packed and shipped, if you are not satisfied with your cover you have a 100% money back guarantee!! We have been supplying franchise dealerships with our Handmade Replacement Covers for over 35 years and we are now offering them to the public! Please feel free to call us at (832) 421-2176 if you have ANY questions!

    Additional information

    SKU

    FRSD0203DBTLP

    Fits Model Year(s)

    2002, 2003

    Part

    Drivers Bottom

    Color

    Medium Parchment "Tan" – Original Factory Color

    Made In

    Houston, TX USA

    Compatible With

    Manual & Powered Seats

    INT TR (Interior Trim) Code

    4H or 8H (This Code is on your Vin Number Sticker)

    Fits

    Heated & Non-Heated Seats

    Inner Liner

    1/2 & 1/4 Inch Padding like OEM

    Material

    Detroit Original Factory Leather

    Surface Finish

    Genuine Leather – Original Factory Color

    Warranty

    1 Year

    Sours: https://leather-auto-seats.com/product/2002-2003-ford-f-250-lariat-leather-seat-cover-driver-bottom-tan/
    02-06 Ford F250/350 Driver Bottom Install 1 of 4

    .

    Seats 2003 f250

    .

    02-06 Ford F250/350 Driver Bottom Install 1 of 4

    .

    You will also be interested:

    .



    513 514 515 516 517