You wouldn’t think an 8-foot-span aircraft could easily navigate an indoor RC flying venue, but pilot Daniel Hör makes it look easy with this A-10 Thunderbolt II! Powered by two Electro Accu ducted fans using a 4S 1200mAh LiPo pack, the Depron foam plane uses 12 servos and is equipped with an onboard camera. At 1:30 into the video, the big jet slows down to an unbelievably slow pace! Thanks to RC Media World for taking this video at the Modell-Hobby-Spiel in Leipzig, Germany.
The term park flyer denotes a class of small, primarily electric powered radio controlled aircraft. The smallest class of park flyers are called micro planes, and are designed to be used in an enclosed area such as a gymnasium or a living room.Larger park flyers can be flown in designated parks known as park flyer sites. A model with low flying speed is more susceptible to wind and turbulence. Park flyers weigh 2 pounds or less, hence park flyers have a speed limit of less than half of the current wind speed. 
Park flyers are an inexpensive and convenient way for beginners to get involved in the hobby of RC flight. The modern materials used in the construction of these aircraft make field repairs possible even after significant crash damage. Their small size and quiet operation make it possible to fly them in residential areas. There are clubs designed to support beginners and operate as a central source for information regarding potential flight locations.
Types of park flyers
Ready-to-fly park flyers, abbreviated as RTF, require no construction or installation. The user may need to perform basic finally assembly, and is able to fly the aircraft.Almost ready to fly park flyers, abbreviated as ATF or ARTF, require construction and installation of parts by the user.
Advanced electronic and material technologies have aided in the development of high-performance, park flyer sized "3D-flyers", or fully aerobatic aircraft capable of extreme high g manoeuvres and nose-up hovering.
A park flyer called the SQuiRT has been named "America's park flyer" due to its travels around the United States of America traveling over 26,000 miles and being flown by over 700 different pilots. This is known as the Wings Across America 2008 adventure.
A note on safety: some 'park flyers' (especially small delta-wings) can fly at an appreciable speed. These can cause injury to passers-by in an accident. Pilots should consider what might happen if they lose control or have radio failure and fly into a person/dog/car/building; therefore keep at an appropriate distance. The Academy of Model Aeronautics recommends a minimum safe distance of at least 50 feet from any spectators other than the pilot.
Indoor RC Airplanes
Building and flying indoor rc planes has become increasingly popular, with the abundance of good quality micro planes readily available.
With electronic components for the radio control flying hobby becoming so small and lightweight, it was inevitable that this sector of the hobby would see an increase in popularity.
The great news is that indoor rc airplanes are readily available in Ready To Fly (RTF) form, and this is ideal for the newcomer to the hobby. But if you do prefer to build, there are plenty of kit choices available too.
Typically these kits are designed to utilise components from RTF micro airplanes (motor, ESC & servos etc.), so a badly damaged RTF foamie indoor plane has a good chance of being resurrected as something else!
Suitable venues for indoor flying include sports halls, gymnasiums, aircraft hangers and the like - any large open space with a high ceiling will do.
RC Planes for Indoor Flying
As previously mentioned, indoor rc airplanes can be purchased RTF and ARF nowadays, whereas previously modellers had to construct their own, either from scratch or by modifying free-flight indoor kits primarily designed for rubber or CO2 power.
Planes like the ParkZone Ember and Vapor, shown below, are excellent choices for beginners to indoor flying.
The small size, ultra light weight and slow flying characteristics make them very suitable indoor rc airplanes indeed.
An example of a scale rc airplane very suitable for indoor flying is ParkZone's Ultra Micro J-3 Cub, shown below.
Although since discontinued, this 18 inch wingspan plane has been a popular choice for indoor flying enthusiasts and is very comfortable flying round a school gymnasium or similar venue. Its stable high wing design makes it an easy plane to fly, quite suitable for the novice.
Above: RC airplanes like this J3 Cub are lightweight and small - perfect for indoor flying.
Of course, rc airplanes like these that are great for indoor flying can also be flown outdoors, but are much more affected by the wind. Even a gentle breeze may be too much for the plane to handle, so ideally they should be flown on calm days only.
But with that said, most of the Horizon Hobby brand Ultra Micro planes (UMX) come equipped with AS3X™ auto stabilisation technology. With AS3X, they are not adversely effected by wind gusts and so don't suffer the normal twitchiness of small planes being flown on a windy day.
Micro Scale Detail
Here in the UK, some of the nicest indoor rc planes I've seen (and owned) come from MicroAces.
Originally profile models designed to accept the electronic components from the aforementioned donor micro planes, the models have evolved into probably the most detailed micro rc planes you're likely to see!
Above: The MicroAces D.H.2 is an amazing miniature rc plane!
I have the Sopwith Camel which, like all the others, doubles up as a great static display model thanks to the insane amount of scale detailing!
A slightly different breed of indoor rc airplane is the 'shock flyer', or shockie.
These ultra-lightweight planes are typically made from Depron foam sheet and carbon strip for strength. They have large flying and control surfaces so they are 3D capable, but at much slower speeds than their outdoor counterparts.
A variation on indoor 3D flying is 4D, whereby the plane is fitted with a variable pitch prop and so 'reverse maneuvers' can be flown - if the pilot is good enough!
The following video shows a typical shockie in action, by Ray Watts (who I used to fly with in my old club)...
This video shows the extremely gentle nature of this style of indoor rc flying, and in capable hands the planes are a joy to watch.
Flying indoor rc airplanes is not only great fun but it's also a good solution to those winter-time blues, when the weather is against you every weekend and you can't fly outdoors.
Indeed, organised indoor flying meetings are commonly held during the winter months.
If you do happen to have a large indoor space in your area, ask around and you might be able to try some indoor flying for yourself!
Above: Jersey Coast Sport Fliers flying some indoor rc airplanes.
Micro rc airplanes.
Indoor flying overview.
Flyer rc indoor
.AMAZING Micro XXS 'Eta' INDOOR POWERED GLIDER: Daniel Hör (Picasso of Depron)
You will also like:
- Power commander fc maps
- Mlp episode 200
- Mhw gunlance build
- Spring hill apartments phone number
- Trading card template powerpoint
- 2020 macbook pro reddit
- Wall decal etsy
- Roblox hole simulator
- Oodle doodle dogs
- Todoroki with makeup
- Teton electric guitars
- Intex pool walmart
- When was minecraft pe made