Makita drill set

Makita drill set DEFAULT

Cordless drills are more powerful than they’ve ever been, yet they’ve also gotten so compact and lightweight that you can probably handle one even if you’ve never picked up a drill in your life. Manufacturers like to market them to pros, but don’t be put off: Anyone going beyond the most rudimentary home improvement tasks—whether hanging a baby gate or mounting shelving—will find that a drill makes the work faster, easier, more enjoyable, and more likely to achieve solid, professional-looking results than hand tools alone. After drilling about 600 holes and sinking at least 50 pounds of screws in drill tests dating back to 2013, we’ve found the DeWalt DCD701F2 Xtreme 12V Max Brushless 3/8 in. Drill/Driver Kit to be the best one yet.

The DeWalt DCD701F2 12-volt drill combines power, comfort, and convenience in a way that none of the other tested drills do. In our tests, it bored 30 1-inch holes through a 2-by-10 on a single battery charge—results that show it can handle just about anything within the four walls of a home, and even the occasional foray into more aggressive work such as a small decking repair. The DeWalt 12-volt’s power is on a par with that of some of the other drills we looked at, but it particularly excels in ergonomics and convenience features. The molded handle seems to account for every curve and bulge of the hand, making this drill the most comfortable we’ve ever held. The battery is designed so that the drill can stand upright when not in use (other drills, like the runner-up Bosch, need to be placed on their side), and the LED is positioned such that it illuminates the drill front better than most. The DCD701F2 also comes with a nice belt hook, and the battery gauge is on each battery rather than on the tool, so you can check batteries without having to insert them into the drill.

If the DeWalt 12-volt is overpriced or unavailable, we also like the Bosch PS31-2A 12V Max 3/8 In. Drill/Driver Kit. This 12-volt Bosch couldn’t drill as many 1-inch holes on a single charge as the DeWalt in our tests, but it still has more than enough power for general home tasks. In our own measurements, we found it to be about 5 ounces lighter than the DeWalt 12-volt, but it feels heavier because the balance isn’t as good. The Bosch battery slides up into the handle, making the grip fatter and not as contoured as the DeWalt’s. The LED also doesn’t illuminate as well. This drill was our pick for years, and it has always been a solid performer. We were willing to overlook its minor inconveniences before, but the more recently released DeWalt solves almost all of them.

If you take on projects that require drilling lots of holes and sinking long screws, we recommend stepping up to the DeWalt DCD791D2 20V Max XR Li-Ion Brushless Compact Drill/Driver Kit. This is a larger, 20-volt drill, but it shares all of the most important characteristics of the smaller, 12-volt DeWalt: It’s very powerful and extremely comfortable to hold and use, and the little convenience features, such as the belt hook and the case, are spot-on. Compared with our 12-volt pick, this larger drill completes tougher jobs much faster, doing the same work in less than half the time, with a battery that lasts longer. The well-positioned LED can also be switched on independently of the drill, a unique feature that makes it a rudimentary flashlight, which could come in handy in nearly any crawl space. For around-the-house tasks, the added speed and power are often unnecessary. But for more production-oriented work, such as putting down decking or building a garden shed, they make a noticeable difference.

If the DeWalt 20-volt drill is not available, we also like the 18-volt Milwaukee 2801-22CT M18 1/2 in. Compact Brushless Drill/Driver Kit. It’s very similar to the DeWalt DCD791D2 in power, ergonomics, and overall design (18- and 20-volt tools are the same—the difference is just marketing). The negatives: It has only a single-setting light that turns on and off with the drill, and the case has hardly any room for drill or driver bits. Those are minor points at best, however, so if you’re already invested in Milwaukee’s cordless tools, or if you find this drill at a lower price than the DeWalt, go for it.

We think that most people will be happy with the power and size of the DeWalt 12-volt, but if you’re looking for a little more, yet you’re hesitant about the size and weight of the larger 20-volt DeWalt, we recommend the DeWalt DCD708C2 Atomic 20V Max Li-ion Brushless Compact Drill/Driver Kit, which splits the difference between the two. This is a relatively new category of tool, usually referred to as subcompacts (although DeWalt refers to theirs as simply “compact”), that is closer to the size of a 12-volt, yet it uses the 20-volt batteries. Combined, this gives it power and size right between the two classes: The tool has enough power for more substantial DIY projects such as light framing, but it’s not as streamlined and easy to use as the 12-volt. We see it as a good drill for someone starting out on the DIY road who may not want to deal with the weight and bulk of the larger drills. Along the same lines, the Atomic is part of DeWalt’s extremely large 20-volt line of tools, all with compatible batteries, so it’s a nice place to start if you expect to grow your collection of cordless tools in the future.

The Ridgid R8701K 18-volt Brushless SubCompact Cordless Drill Driver Kit is another subcompact that performed about the same as the DeWalt Atomic. Like the DeWalt, it’s not the best tool for heavy-duty jobs, but it offers a solid combination of power, size, and cost for basic DIY work. It’s also a good entry point into the large Ridgid line of 18-volt tools. Between the two, we prefer the DeWalt—the DeWalt has a more streamlined battery setup, and the Ridgid gear selector toggle is a little small and hard to see, but these are minor differences.

A bit set to go with the drill

Everything we recommend

Why you should trust us

Since 2001, I’ve used and evaluated tools on a daily basis. I spent 10 years in construction as a carpenter, foreman, and site supervisor, working on multimillion-dollar residential renovations in the Boston area. In that time, I’ve probably used at least 50 different drills, and I’ve been testing them for Wirecutter since 2015. I also live in a 1773 saltbox that requires a very hands-on, tool-heavy approach. In addition, I raise sheep, cows, pigs, bees, and chickens, so between all of the loose floorboards, framing repairs, shed adjustments, beehive building, coop fixes, stall creation, and fence alterations, I have a drill in my hand nearly every single day. Prior to owning the saltbox, I gutted and rebuilt a circa-1900s farmhouse.

To gain even more insight on drills, I spoke with Timothy Dahl, DIY editor at Popular Mechanics and founder and editor of the home-improvement site Charles & Hudson and the family DIY site Built by Kids. Dahl has written about tools since 2002 and has run Charles & Hudson since 2005. I also spoke with Harry Sawyers, a Wirecutter editor formerly with This Old House and Popular Mechanics. Harry has written about tools since 2005, including putting together a 12-volt drill test for Gizmodo.

Who should get this

Five different drills we tested.

A screwdriver can handle household tasks such as tightening cabinet hinges, putting up hooks, or swapping out the batteries in a toy, but once you get beyond that level, a drill can make life a lot easier. Putting up baby gates or assembling knockdown furniture, for example, is just way easier with a drill. Then, once you get to full-on DIY projects like replacing a rotted deck board or fixing a sagging gutter, a drill is essential.

For most household tasks, a 12-volt drill is more than adequate. It’s the smallest class of drill, and due to advances in battery and motor technology, such models have become formidable with regards to power. Good ones have no problem with tasks like swapping out light fixtures, building a bookshelf, and making minor drywall repairs, and they can even handle an occasional foray into more aggressive work such as fixing a saggy gutter or replacing a few rotted deck boards. The small size works well if you’re storing it in the house.

If you’re a rabid DIYer with plans to build a deck, a doghouse, and a tree house, we recommend a stronger, 18- or 20-volt drill. These models offer longer battery life and more power. They’re designed for constant heavy-duty use and might be seen hanging off a pro carpenter’s tool belt. They can handle all but the most aggressive jobs (like mixing mortar with a paddle or repetitive drilling into concrete). They’re a bit bigger and better suited for storage in a garage or shed, and as a result some folks might find their size and weight a little harder to manage than that of smaller, 12-volt tools. On average, 12-volt drills measure 6 to 6½ inches in length and weigh less than 2½ pounds; 18- and 20-volt drills average a length of 6½ to 7 inches and weigh around 3½ pounds (and have much bulkier batteries).

Recently, a new class of 18- and 20-volt drill has become available that splits the difference—both in size and power—between the 12-volts and the full-size 18 and 20s. They’re typically referred to as subcompacts, and we think of them as a great entry-level DIY tool, perfect for light framing and more heavy-duty work, but still manageable as an around the house tool for hanging curtain rods, adjusting doors, and hanging shelves. The downside is that they’re heavier than the 12-volts and not as powerful as the larger 18- and 20-volt models, so in a way, they’re a jack-of-all-trades, master of none. They’re also an affordable way to enter into a company's 18- or 20-volt line of tools, all of which have compatible batteries.

Sometimes, all you really need is a screwdriver

How we picked

For a general around-the-house drill, we recommend a 12-volt brushless drill kit that comes with a pair of lithium-ion batteries. These drills offer the best combination of power, maneuverability, run time, and cost. They aren’t designed for all-day aggressive use, but they are more than capable for basic home maintenance and repair, and if needed they can sink a 3-inch screw on occasion. They’re still compact enough to take up hardly any space in a hall closet or even a kitchen junk drawer.

Power: We’ve been testing drills since 2015, and we’ve come to the conclusion that the 12-volt drills from quality manufacturers all have more than enough power for standard household tasks. It’s not uncommon for one to be able to sink over 80 3-inch screws through solid wood on a single battery charge or to drill more than 20 1-inch holes through a 2-by-10. In our most recent, 2020 testing, most of the drills had similar performance numbers—similar enough that we wouldn’t choose one over another based on power. They were all within the margin of error.

To be clear, 18-volt tools are the same as 20-volt tools—it’s just marketing.

We also tested a number of 18-volt drills. These offer more power but tend to be more expensive, and we don’t feel that added power is worth the heavier weight for simple around-the-house tasks. But these drills do have their place, which is why we have recommendations for both the larger and smaller classes of 18-volt drills below.

We need to note that some companies list the nominal voltage of the battery (the voltage at which the tool operates), while others use the higher maximum voltage (the spike that occurs when you first pull the trigger). That said, 18-volt tools are the same as 20-volt tools—it’s just marketing. For the purposes of this article, we’re using the term “18-volt,” which has long been the standard term for the class.

Two drills, side-by-side.

Ergonomics: With the power question settled, we focused our attention on ergonomics. We wanted a drill that was small, comfortable to hold (for both large and small hands), relatively light, and nicely balanced. This is where the best drills really distinguished themselves. Some felt like boat anchors, while others seemed perfectly molded for our hands. Comfort makes a huge difference, especially when you’re reaching overhead with the tool for extended periods or doing a repetitive task like replacing deck boards or putting together a piece of knockdown furniture.

Brushless motor: Compared with a traditional brushed motor, brushless motors allow for a smaller tool with better battery life and more power. Once an expensive outlier in the industry, brushless tools are now coming down in price, and there is no question that companies are trending toward brushless. We anticipate that major manufacturers will be making moves to discontinue their brushed lines in the future. Even brands traditionally associated with homeowner-grade tools, such as Ryobi and Skil, now offer brushless drills.

Convenience features: Most drills come with additional features like a belt clip and an LED light, but they’re not all the same. We wanted a belt clip that was wide and easy to use, and an LED that effectively lit up the workspace.

Cost: Brushless 12-volt drills from reputable manufacturers typically cost between roughly $120 and $160 (but are occasionally available for less). Given the benefits of brushless—most notably the reduced size and weight—we think this is an appropriate cost. Quality brushed drills, such as our runner-up, the Bosch PS31-2A, linger around the $100 to $120 mark. So there’s often an upcharge for brushless, but it’s not a huge one, especially when you consider the long lifespan of the tool.

How we tested

We tested out the drills by, well, driving a lot of screws and drilling a lot of holes. We used structured tests to stress the drills and run their batteries dry. I also used the drills in less structured settings as I worked on various projects—I built a wall, fixed a hay feeder, repaired a chicken coop, built two bookshelves, put down a floor, and outfitted my workshop with shelving. I also adjusted a few doors, swapped out some license plate lights, put up some mudroom hooks, and hung a heavy mirror.

A selection of drills being tested.

For our structured tests, we sunk 3-inch screws into doubled-up 2-by-10 lumber (a total of 3 inches thick). We did this on a fully charged battery until the battery was empty. This test simulated the process of framing, as if someone were building a tree house or a partition wall. To prevent overheating, we rested the drills after every 14 screws.

We then outfitted each drill with a new Irwin 88816 1-inch Speedbor Spade Bit and drilled holes through 1½-inch-thick 2-by-10s until the battery wore out. Again, we rested the drills after every five holes. This was no doubt an aggressive task for the 12-volt drills, but we wanted a direct comparison against the 18-volt drills to truly see whether models’ capabilities matched against one another. Also, we wanted to test the upper end of the 12-volts to see which models could handle the occasional foray into more ambitious work.

For these tests, we set the drills to the faster of the two speeds and switched over to the slower speed (with higher torque) when the drill stopped being effective. In the lower gear, we were usually able to continue on for a bit until the battery was completely drained. For the drilling test, the 12-volts usually could handle only a few holes before we switched over to the lower gear with the higher torque needed for the difficult task.

A person using our top pick DeWalt drill to drill a hole.

Obviously, the number of holes drilled and screws driven was very important, but we also kept an eye on each drill’s performance and handling, asking questions like: How often does it stall out? How much does it struggle? How does it feel in the hand? We also looked at the overall design of the drill, seeing how the toggle switches worked and how easy it was to take the battery off and put it back on again.

Our pick: DeWalt DCD701F2 Xtreme 12V Max Brushless 3/8 in. Drill/Driver Kit

Our pick for the best drill the DeWalt DCD701F2 Xtreme 12V Max Brushless 3/8 in. Drill

The DeWalt DCD701F2 Xtreme 12V Max Brushless 3/8 in. Drill/Driver Kit offers the best combination of power, size, ergonomics, and convenience. Like all of the drills we looked at, it has more than enough strength for household tasks, but where it really shines is in ergonomics. It is, by far, the most comfortable drill we’ve held. In addition, it does well in offering all of the other, minor touches, providing a wide belt clip and a bright LED positioned to cast maximum light at the front of the drill. The overall body design is balanced, and because of the way the battery is positioned, the tool can stand up, unlike many of the others, which you can place only on their sides.

In our power tests, the DeWalt 12-volt was able to drill 30 1-inch holes into a 2-by-10 on a single battery charge and to sink more than 100 3-inch drywall screws into a doubled-up 2-by-10 (3 inches of wood). Obviously, that’s more than enough oomph to tighten up some cabinet hinges and hang a mirror, but it’s also plenty for those times you might need to deal with a larger project, such as a deck repair or a fix on a sagging gutter. If you need a drill for constant all-day aggressive use, we recommend our upgrade pick, but if you’ll be dipping a toe into larger DIY projects only from time to time, the DeWalt 12-volt will have no problems.

In general, 12-volt drills are little, but the DeWalt DCD701F2, with its brushless motor, is downright tiny. From tip to tail, the DeWalt 12-volt is less than 6 inches long; it was the shortest drill we looked at. On our scale it weighed just under 2½ pounds, landing in the midrange of weight, but the balance of the DeWalt 12-volt was so nice that, before we weighed the drills, we were convinced it was the lightest one we were testing. The truth is that the Bosch GSR12V-300B22 is almost a half pound lighter.

Three DeWalts drills side by side ordered from largest to smallest.

From left to right, the three DeWalts in descending order of size. Photo: Sarah Kobos

A side-by-side comparison of our two DeWalt drills.

DeWalt 12-volt (right) is much smaller than the DeWalt 20-volt (left). Both have excellent handles and are easy to use. Photo: Doug Mahoney

What’s most significant about the DeWalt 12-volt is the ergonomics. The handle appears to be designed with every contour of the hand in mind. Even the slightest details—such as the little depression where the forefinger knuckle rubs against the drill body—are accounted for. The handle tapers nicely, allowing the pinky finger to find purchase, and the trigger and forward/reverse control are well positioned for quick use.

DeWalt employs a “foot”-style battery that slides into the base of the handle from the front of the tool. Although the design makes for an overall larger tool, it also provides a small platform that the drill can stand on. In contrast, Milwaukee and Bosch opt to use a canister-style battery that slides up into the handle, so not only are the handle ergonomics bulky, but in addition, with no foot, the drills can only rest on their sides. Although both the Bosch and Milwaukee models we tested are appropriately padded, we prefer placing a drill upright, especially on delicate surfaces.

Close up of a hand holding the battery gauge of the DeWalt 12-volt.

This battery design offers another benefit: The battery gauge is on the battery rather than on the tool. This way, you can quickly check both batteries before you start on your project. Otherwise, as with the Bosch and Milwaukee, you need to put each battery into the drill and activate the drill in order to see how much charge remains. It’s a minor point, but it emphasizes the overall convenience of the DeWalt design.

The DeWalt and Bosch drills side by side facing a wall to show their differences in the handles, lights and battery.

With the battery designed to slide into the base of the handle, DeWalt also had room to place the LED down below the grip. The alternative location for the light, which many other 12-volt drills use, is just above the trigger. The lower position of the DeWalt’s LED means it casts much better light at the nose of the tool and reduces the drill’s shadow considerably. In our tests, the light from the Bosch and Milwaukee LEDs barely illuminated above the drill at all.

The DeWalt DCD701F2 kit comes with two batteries and a small duffel-style carrying case. You won’t find a ton of additional room in the bag, but it’s enough for you to keep some drill and driver bits or a couple of other small tools. Even with the drill inside, the bag is compact, and you can easily stuff it in a closet or on a basement shelf.

Close up of a person holding the DeWalt drill.

Flaws but not dealbreakers

The one slight negative we found with the DeWalt DCD701F2 kit is that taking the battery off the tool is a little counterintuitive. As on most drills, a sliding tab releases the battery, but on the DeWalt 12-volt, you need to press the tab in toward the drill. Other models, such as the 20-volt DeWalt DCD791D2, have the tab sliding away from the tool, making it easier to just grab, unlatch, and pull off. This is truly a minor point, though, and once we got used to the tab on the 12-volt, we had no issues.

Last, this isn’t a flaw unique to this model, but it is something you should understand about the drill/driver category: This tool isn’t designed to drill masonry. For that, you need a hammer drill function. DeWalt makes a pricier version of our pick that includes this feature, the DeWalt DCD706F2. We haven’t tested that model, but we believe its performance should be in line with the impressive results we got from its close relatives, the 12-volt and 20-volt versions.

Runner-up: Bosch PS31-2A 12V Max 3/8 In. Drill/Driver Kit

Bosch PS31-2A 12V Max 3/8 In. Drill

If the DeWalt 12-volt isn’t available and you’re willing to make a few sacrifices, we also like the Bosch PS31-2A 12V Max 3/8 In. Drill/Driver Kit. This model is our previous top pick, and it offers a lot of power—similar to what the DeWalt offers—but it has a longer body and the ergonomics aren’t anywhere near as good. Also, the small convenience features that we like so much on the DeWalt, such as the useful light placement and the foot-style battery, are absent here. Still, we’ve been using this tool for years, and it has always performed well and remained a reliable option.

Close of of a person holding the Bosch drill in their hand.

In our tests, the Bosch PS31-2A drilled five fewer holes than the DeWalt DCD701F2, lasting for 25 holes, but it sunk more screws. It was the only brushed drill we tested that could hang with the brushless models. But compared with the DeWalt, it isn’t as good in its ergonomics. Bosch has gone with a canister-style battery that slides up into the handle, making the handle fatter and more difficult to hold than that of the DeWalt. This design also messes with the drill’s balance, making the Bosch feel heavier than the DeWalt (which, according to our measurements, is actually 5 ounces heavier).

The LED is positioned right above the trigger, so it illuminates a smaller area. The battery life indicator is on the tool rather than on the battery, and the drill has no belt hook.

Upgrade pick: DeWalt DCD791D2 20V Max XR Li-Ion Brushless Compact Drill/Driver Kit

The DeWalt DCD791D2 20V Max XR Li-Ion Brushless Compact Drill

By choosing the DeWalt 20-volt over the DeWalt 12-volt, you’re getting more speed, more power, and more run time. To determine this, we drilled five 1-inch holes with the 12-volt and five with the 20-volt. Both drills completed the task, but the 20-volt did so in 20 seconds, whereas the 12-volt took 1 minute. During the test, the 12-volt often got bound up and had a much harder time, while the 20-volt just blew right through the wood. So although the 12-volt is capable of tougher jobs, that’s really not what that smaller tool is designed for. The 20-volt drill, on the other hand, is built for these tasks. If that’s the kind of work you’re doing all day, you’ll appreciate the difference.

On a single battery charge, the DeWalt 20-volt drilled 52 1-inch holes through the 2-by-10. This result is on a par with what we saw from the other 18-volt drills we tested, and that’s plenty of power for more involved DIY tasks such as some kinds of framing or a deck project.

The larger DeWalt shares all of the successful characteristics of its 12-volt counterpart. It has the same excellent handle, the foot-style battery, and a great belt hook.

close up of a person holding the DeWalt 20-volt drill in their hand.

As on the 12-volt drill, the LED sits at the foot of the 20-volt tool, but here DeWalt has put an unusual spin on the idea. On this model DeWalt provides a three-setting toggle just above the light, giving it two brightness settings as well as a simple “on” setting that lets you keep the light illuminated and use it like a rudimentary flashlight. It can’t replace a real flashlight (we have some more thoughts on those), but in a crawlspace or a poorly lit basement, it has come in handy for us.

Last, the DeWalt DCD791D2 kit comes with a nice hard case that leaves plenty of room for drill and driver bits.

Also great: Milwaukee 2801-22CT M18 1/2 in. Compact Brushless Drill/Driver Kit

Milwaukee 2801-22CT M18 1/2 in. Compact Brushless Drill/Driver Kit

If the DeWalt 20-volt is not available, we also recommend the Milwaukee 2801-22CT M18 1/2 in. Compact Brushless Drill/Driver Kit. In both form and performance, it’s nearly identical to the DeWalt 20-volt, even down to the average price, right around $200. The Milwaukee is a little shorter from tip to tail but is an ounce heavier. We gave the DeWalt 20-volt the edge here only because the Milwaukee drill does not have additional light features and the case lacks extra room to store drill or driver bits. Neither of those shortcomings is a true dealbreaker, and we think you’d be able to make do just fine without those features. If you see this model for less than the DeWalt 20-volt, go for it. Or, if you already own tools on the Milwaukee M18 platform, you have a convenient way to expand your set with this drill.

Milwaukee 2801-22CT M18 1/2 in. Compact Brushless Drill/Driver Kit

Also great: DeWalt DCD708C2 Atomic 20V Max Li-Ion Brushless Compact Drill/Driver Kit

DeWalt DCD708C2 Atomic 20V Max Li-Ion Brushless Compact Drill

If the 12-volt size feels a little too underpowered, but you’re concerned the 20-volt will feel a little too big and unwieldy, we recommend the DeWalt DCD708C2 Atomic 20V Max Li-ion Brushless Compact Drill/Driver Kit. In all ways, this drill splits the difference between the 12 and 20-volt DeWalts. It can handle more aggressive tasks than the 12-volt, like light framing and larger diameter hole drilling, but it’s much smaller than the more powerful 20-volt drill. As long as you’re aware of these limitations, the Atomic presents a nice combination of size and power, and one we feel is well-suited to the entry-level DIYer. It is also a fairly inexpensive way to get started with Dewalt’s expansive 20-volt DeWalt platform.


Makita is the innovation leader in cordless tool technology, and the XT263M Combo Kit gives you two cordless solutions to handle most drilling, driving and fastening applications. The 18V LXT® Impact Driver weighs only 3.3 lbs. for a superior power-to-weight ratio, and the 18V LXT® Hammer Driver-Drill delivers 750 in.lbs. of torque for the most demanding drilling and driving applications. The 18V LXT® 4.0Ah battery provides 35% more run time per charge than the BL1830 battery, yet it charges in only 40 minutes – the fastest charge-time in the category – for less downtime and increased productivity. For added convenience, the batteries feature an on-board L.E.D. charge level indicator. The XT263M is a kit and includes two 18V LXT 4.0Ah batteries, Rapid Optimum Charger, and tool case.

Both tools feature Extreme Protection Technology (XPT™), engineered for increased dust and water resistance for operation in harsh job site conditions.

It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.

  • Tool Count : 2
  • Voltage : 18V
  • Battery : 18V LXT® Lithium-Ion
  • Battery Charge Time (minutes) : 30
  • Shipping Weight : 18 lbs.
  • UPC Code : 088381-812795
  • Products Related To XT263M

    Page of Start over

    1. Brute force facebook password cracker
    2. Ninetales soul silver
    3. L2350 kubota loader
    4. Lexmark laser printers

    Buying guide for best makita drills

    Makita, a company that is globally recognized for its innovation and quality tools, started in 1915 on a slightly different path. Mosaburo Makita founded the company with the idea of repairing and selling motors, transformers, and lighting equipment. It wasn't until 1958 that the company began marketing electric planers. By the following year, Makita was officially making electric power tools, and in 1969 premiered its first rechargeable drill.

    Over the past half century, Makita has managed to amass an expansive line of drills, drivers, and combo packages for professionals and DIYers alike. With such an overwhelming number of options, how do you know which Makita drill or combo set is right for you?

    BestReviews is here to help you make an informed decision with a comprehensive shopping guide to Makita drills.

    Makita drill innovations

    Makita focuses on creating tools that are both user-friendly and environmentally friendly. The company has continually been an innovator, incorporating new technology at times decades before the competition. Following are some of the innovations you'll find on Makita drills and drivers, as well as how they impact you.

    18V LXT lithium-ion cordless system: Created in 2005, this advanced cordless technology exceeds the performance of corded tools. The result is an extensive line of more efficient, higher-powered cordless tools.

    12V Max CXT lithium-ion cordless system: Makita's more compact cordless solution. The result is a longer run time, increased power and speed, and longer life for the tools you use most.

    Active 3 controls: A technology that enables chargers and batteries to exchange current, voltage, and temperature information during the charging process. The result is a battery that spends more time working and less time charging.

    Automatic speed change: Detects load and automatically adjusts the tool's speed and torque. The result is a consistently higher-performing drill.

    AVT (anti-vibration technology) and Advanced AVT: Based on seismic engineering, this technology significantly reduces vibration in hand tools with a three-component system. The result is less fatigue for the user and more power to the bit.

    ImpactX and Impact GOLD: Technologies designed to help keep bits from breaking under the increased performance demands of contractor-quality tools. Results in bits that last up to ten times longer.

    Oil impulse: Utilizing an oil bath in the hammer-anvil mechanism, Makita has found a way to reduce the noise of impact drivers. The result is a tool that can be used in low-noise environments.

    Push drive: This technology reserves power for times when the tool is engaged in working. The result is increased efficiency, longer run time, and lower noise.

    Quick shift mode: A technology that is used in impact drivers to assist with precision fastening. The result is less screw stripping and breaking, as well as less damage to your work.

    XPT (Extreme Protection Technology): A system of integrated seals designed to keep dust and water out of your tools. The result is tools with increased durability and longer life.

    Types of Makita drills

    Makita has five tool lines available when it comes to drills and drivers – drills bore through material, drivers set screws.

    • Driver-drills: This versatile tool is designed to drill holes and drive screws.

    Price: These tools range from $100 for just the tool to $235 for the tool, batteries, charger, and bag.

    • Drywall screwdrivers: These tools are specially designed to drive drywall screws.

    Price: The average price ranges from $140 for just the tool to $300 for the tool, batteries, charger, and bag.

    • Hammer driver-drills: A hammer drill combines rotation and rapid blows to drill into masonry or rock. Some feature a setting that also allows for driving screws.

    Price: The average price ranges from $100 for just the tool to $350 for the tool, batteries, charger, and bag.

    • Impact drivers: This driver uses rotation and concussive blows to drives screws into dense wood.

    Price: The average price ranges from $115 for just the tool to $235 for the tool, batteries, charger, and bag.

    • Screwdrivers: These tools are specifically designed to drive screws.

    Price: The average price ranges from $150 for just the tool, $190 for the tool with auto-feed, to $340 for the tool, batteries, charger, and bag.

    • Combo kit: Sometimes you need more than one tool to get the job done. For instance, if you're working on drywall, you might need a cut-out tool along with a drywall screwdriver to finish up. Makita has packaged related tools together, along with the accessories, so you can purchase everything in one combo kit.

    Price: Since what is included in a combo kit can vary, the price can range from $140 to over $800, depending on your needs.

    Did you know?

    Makita makes drill bits that are 17 times more magnetic than regular bits. This technology helps hold screws to the end of the bit in even the most challenging situations.



    Makita drill warranties

    The best way to figure out how long a product is designed to last is to take a peek at the warranty. If it's covered, odds are that it won't be breaking down in that time frame. But how long a tool will last after the warranty period depends on use and care. The better you treat your Makita drill, the longer it will work. Some construction professionals have stated that up to 15 years is a good run. Here's the warranty structure for Makita.

    30 days: Every Makita product, except for accessories and/or wearable items, comes with a 30-day return/replacement guarantee.

    One year: Every Makita product is warranted to be free of defects from workmanship and materials for one year.

    Three years: Every Makita lithium-Ion tool, battery, and charger is warranted to be free of defects from workmanship and materials for three years.


    • When using a Makita drywall screwdriver, use a lower revolutions per minute (rpm) setting. The lower rpm delivers higher torque, which will help you fasten the screws into the wood studs.

    • As soon as you start to notice an appreciable performance loss in your cordless Makita tool, it’s time to stop using that tool and charge the battery. If you discharge the battery to the point where it can no longer power the tool, you may cause permanent damage to the battery. This will result in decreased run times.

    • Makita makes it easy for you to dispose of batteries. You can take them to any of the company's factory service centers for recycling. Alternately, any rechargeable batteries you have may be taken to a Call2Recycle drop site. For more information or to find a location near you, call 800-822-8837.


    Q. What do I do if I need more specific information on a particular Makita power tool?

    A. The upper right-hand corner of the company website has a search box where you can enter the model number. This will take you to a page detailing the specifics of the model you entered.

    Q. Is it possible to overcharge a Makita lithium-ion battery?

    A. No. Makita has designed its chargers to communicate with the batteries. Once the charger detects that a battery is fully charged, it switches to maintenance mode.

    Q. How long does it take to fully charge a Makita battery?

    A. The average charge times per ampere-hour are as follows: 1.5Ah take 15 minutes; 2.0Ah take 20 minutes; 3.0Ah take 30 minutes, 4.0Ah take 40 minutes; 5.0Ah take 45 minutes; 6.0Ah take 60 minutes.

    Makita 18-Volt LXT Brushless Drill/Drive Combo Kit Unboxing
    • Makita Rotary Hammer SDS in Case Makpac - Blue (DHR202ZJ)
    • Makita DTD152Z 18V Impact Driver Body Only - Blue
    • Makita DHP482Z 18v Combi Drill (Body Only)
    • Makita DTD154Z 18V Cordless Impact Driver
    • Makita DHP481Z Hammer Drill
    • Makita 18V Combi Drill, Body Only (DHP485Z)
    • Makita Cordless LXT 18V Li-Ion Combi Drill (DHP482Z) & Impact Driver (DTD152Z)
    • Makita DHP453ZLXT 18V Combi Drill

    Set makita drill

    Best Cordless Drills of 2021

    While car shopping, you might consider a vehicle’s power, performance, speed, and handling. The same applies if you’re in the market for a cordless drill—only instead of driving highways, you’re driving screws and holes into wood, drywall, and metal.

    In the past decade cordless drills have become more versatile, powerful, lighter, and energy-efficient, thanks to advancements in lithium-ion battery technology. (The batteries often last longer and charge faster.)

    “A more recent trend we’re seeing is interchangeable batteries that work among a brand’s entire suite of power tools,” says Courtney Pennicooke, CR’s market analyst for cordless drills. “So you can use the same batteries for your drill, chainsaw, and string trimmer. You can adjust the voltage to match the project you’re working on and save money by buying bare tools to complete your set.”

    Whether installing a new ceiling fan or building a backyard shed, more consumers are turning to adaptable heavy-duty drills to get the job done. According to a recent CR member survey, those who own cordless drills overwhelmingly prefer heavy-duty models (18 to 20 volts or higher). Forty-two percent of members own 18-volt drills and 22 percent own 20-volt models. Two percent go all-in with drills that have 22 volts or higher.

    But how much power do you really need? General-use (about 12 volts) and light-duty drills can handle most household jobs.

    You know the drill. We narrowed down the field to the most widely available models and ran them through a series of tests in our cordless drill lab, where we use a device called a dynamometer that measures torque under different loads. We translated those readings into scores for power, speed, and run time. We also incorporated ratings for predicted reliability and owner satisfaction based on data from CR’s member survey. Two-thirds of cordless drill brands rate favorably for both. Bosch, DeWalt, Makita, Milwaukee, and Ridgid top these ratings, earning Excellent marks for both predicted reliability and owner satisfaction. Chicago Electric Power Tools sits on the opposite end of the spectrum, rating only Fair for reliability and Poor for owner satisfaction.

    Ten of our top cordless drills are listed here in alphabetical order. For more details on drill types, see our cordless drills buying guide or jump right to our comprehensive cordless drill ratings.

    NEW!! Makita sub-compact Drill Driver kit


    You will also be interested:


    230 231 232 233 234